Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment
Maritime Engineering
The Journal of Engineering for the Maritime Environment is concerned with the design, production and operation of engineering artefacts for the maritime environment. The journal straddles the traditional boundaries of naval architecture, marine engineering, offshore/ocean engineering, coastal engineering and port engineering.
"We welcome papers from authors wishing to publish their research on the design, production and operation of engineering artefacts for the maritime environment.
The Journal maintains the highest standards through their guidance as well as through scrutiny of papers by independent referees who peer-review the papers submitted for publication." Professor Ajit Shenoi - University of Southampton, UK
This journal is a member of the Committee on Publication Ethics (COPE).
For more information about the journal please contact: For more information about the Journal please contact jeme@sagepub.co.uk
The Journal of Engineering for the Maritime Environment provides an international forum for engineers from a variety of disciplines with a common interest in the technology, design, production and operation of engineering artefacts for the maritime environment. The unique attributes of Journal of Engineering for the Maritime Environment are:
· It straddles the traditional boundaries of naval architecture, marine engineering, offshore/ocean engineering, coastal engineering and port engineering.
· Advances in new techniques involving cross-disciplinary technologies are encouraged.
· Focus on the technology and underpinning sciences that enable better understanding and utilisation of the life cycle of maritime assets (design, production, operation, disposal) in the maritime environment).
The journal addresses the engineering artefact as a system in itself and as a component or facilitator of a larger goal, i.e. the sea and cargo transport chain, the fisheries and aquaculture chain, the oil and minerals wealth exploitation chain. Individual articles should reflect the interdisciplinary nature and system engineering approach of the journal.
Specific Topics include:
· Maritime Engineering Sciences: concurrent engineering; safety; fluid dynamics; structural mechanics; martronics; materials-structure and fluid-structure interactions; powering, manoeuvring, propulsion and load response; engine research; stability; system dynamics; systems engineering; simulation, automation and control; big data
· Technologies: computation technology; design methodology; energy technologies; ;environmental mitigation technology; production technology;
· Societal issues: maritime and energy economics; maritime and energy policy; environmental engineering; human factors and ergonomics; management science; risk and safety engineering.
· Mathematical disciplines: operational research; solid/surface modelling; probability and statistics; variational calculus, bifurcations and chaos, nonlinear state space models, numerical modelling and modal updating, uncertainty modelling.
This journal is fully peer reviewed and is a member of the Committee on Publication Ethics (COPE).
| Professor Yonghwan Kim | Seoul National University, South Korea |
| Weicheng Cui | Westlake University, China |
| Selma Ergin | Istanbul Technical University, Turkey |
| Spyros Hirdaris | American Bureau Shipping, USA |
| Wang Jin | Liverpool John Moores University, UK |
| Yooil Kim | Inha University, Korea |
| Hua Liu | Shanghai Jiao Tong University, China |
| Gerasimos Theotokatos | University of Strathclyde, UK |
| Professor R A Shenoi | University of Southampton, UK |
| Boo -Woo Nam | Seoul National University, Korea |
| Moustafa Abdel-Maksoud | Technische Universit ä t Hamburg (TUHH), Germany |
| H Chung | Chungnam National University, S. Korea |
| W-C Cui | Shanghai Ocean University, China |
| M Duan | Chiese Petroleum University, Beijing, China |
| C A Frangopoulos | National Technical University of Athens, Greece |
| P Ghadimi | Amirkabir University of Technology, Iran |
| K Iijima | Osaka University, Japan |
| Yu Long | Shanghai Jiaotong University, China |
| Q Ma | City, University of London, UK |
| K Maki | Univesity of Michigan, USA |
| A Murphy | Newcastle University, UK |
| J K Paik | Pusan National University, S. Korea |
| A Papanikolaou | National Technical University of Athens, Greece |
| Jonas Ringsberg | Chalmers University of Technology, Sweden |
| J Romanoff | Aalto University, Finland |
| P K Sahoo | Florida Institute of Technology, USA |
| T Sahoo | Indian Institute of Technology Kharagpur, India |
| R Sharma | Indian Institute of Technology Madras, India |
| Sanjay Sharma | University of Plymouth, UK |
| C G Soares | IST Technical University of Lisbon, Portugal |
| R Sutton | University of Plymouth, UK |
| G Theotokatos | University of Strathclyde, UK |
| J Wang | Liverpool John Moores University, UK |
| X Yan | Wuhan University of Technology, China |
Manuscript Submission Guidelines: Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment
This Journal is a member of the Committee on Publication Ethics.
Please read the guidelines below then visit the Journal’s submission site https://mc.manuscriptcentral.com/jeme to upload your manuscript. Please note that manuscripts not conforming to these guidelines may be returned.
Only manuscripts of sufficient quality that meet the aims and scope of Journal of Engineering for the Maritime Environment will be reviewed.
There are no fees payable to submit or publish in this Journal. Open Access options are available - see section 3.3 below.
As part of the submission process you will be required to warrant that you are submitting your original work, that you have the rights in the work, that you are submitting the work for first publication in the Journal and that it is not being considered for publication elsewhere and has not already been published elsewhere, and that you have obtained and can supply all necessary permissions for the reproduction of any copyright works not owned by you.
- What do we publish?
1.1 Aims & Scope
1.2 Article types
1.3 Writing your paper - Editorial policies
2.1 Peer review policy
2.2 Authorship
2.3 Acknowledgements
2.4 Funding
2.5 Declaration of conflicting interests
2.6 Research Data - Publishing policies
3.1 Publication ethics
3.2 Contributor's publishing agreement
3.3 Open access and author archiving - Preparing your manuscript
4.1 Formatting
4.2 Artwork, figures and other graphics
4.3 Supplementary material
4.4 Reference style
4.5 English language editing services - Submitting your manuscript
5.1 ORCID
5.2 Information required for completing your submission
5.3 Permissions - On acceptance and publication
6.1 Sage Production
6.2 Online First publication
6.3 Access to your published article
6.4 Promoting your article - Further information
Before submitting your manuscript to Journal of Engineering for the Maritime Environment, please ensure you have read the Aims & Scope.
- Original Article: Describes a piece of original or substantially original research, or some aspect of design development, manufacture, operation and maintenance, or engineering education
- Review Article: A critical review of the state-of-the-art with examples of applications in design and profitable manufacture without extensive analysis
- Case Study: Describes the application of a technique, procedure or management concept in a real situation
- Technical Note: A short, interim statement on a research project or description of some new development
Length
- In general, Original Articles, Review Papers and Case Studies should not normally exceed 5000 words (with up to 10 illustrations). Longer articles will be considered, however, our criterion is that the content justifies the length of the article.
- Technical Notes should not exceed 1500 words and 5 illustrations.
- Discussions on papers already published should not exceed 500 words and 2 illustrations.
The Sage Author Gateway has some general advice and on how to get published, plus links to further resources. Sage Author Services also offers authors a variety of ways to improve and enhance their article including English language editing, plagiarism detection, and video abstract and infographic preparation.
1.3.1 Make your article discoverable
When writing up your paper, think about how you can make it discoverable. The title, keywords and abstract are key to ensuring readers find your article through search engines such as Google. For information and guidance on how best to title your article, write your abstract and select your keywords, have a look at this page on the Gateway: How to Help Readers Find Your Article Online.
Sage does not permit the use of author-suggested (recommended) reviewers at any stage of the submission process, be that through the web-based submission system or other communication. Reviewers should be experts in their fields and should be able to provide an objective assessment of the manuscript. Our policy is that reviewers should not be assigned to a paper if:
• The reviewer is based at the same institution as any of the co-authors
• The reviewer is based at the funding body of the paper
• The author has recommended the reviewer
• The reviewer has provided a personal (e.g. Gmail/Yahoo/Hotmail) email account and an institutional email account cannot be found after performing a basic Google search (name, department and institution).
Papers should only be submitted for consideration once consent is given by all contributing authors. Those submitting papers should carefully check that all those whose work contributed to the paper are acknowledged as contributing authors.
The list of authors should include all those who can legitimately claim authorship. This is all those who:
- Made a substantial contribution to the concept or design of the work; or acquisition, analysis or interpretation of data,
- Drafted the article or revised it critically for important intellectual content,
- Approved the version to be published,
- Each author should have participated sufficiently in the work to take public responsibility for appropriate portions of the content.
Authors should meet the conditions of all of the points above. When a large, multicentre group has conducted the work, the group should identify the individuals who accept direct responsibility for the manuscript. These individuals should fully meet the criteria for authorship.
Acquisition of funding, collection of data, or general supervision of the research group alone does not constitute authorship, although all contributors who do not meet the criteria for authorship should be listed in the Acknowledgments section. Please refer to the International Committee of Medical Journal Editors (ICMJE) authorship guidelines for more information on authorship.
Please note that AI chatbots, for example ChatGPT, should not be listed as authors. For more information see the policy on Use of ChatGPT and generative AI tools
All contributors who do not meet the criteria for authorship should be listed in an Acknowledgements section. Examples of those who might be acknowledged include a person who provided purely technical help, or a department chair who provided only general support.
Any acknowledgements should appear first at the end of your article prior to your Declaration of Conflicting Interests (if applicable), any notes and your References.
2.3.1 Third party submissions
Where an individual who is not listed as an author submits a manuscript on behalf of the author(s), a statement must be included in the Acknowledgements section of the manuscript and in the accompanying cover letter. The statements must:
- Disclose this type of editorial assistance – including the individual’s name, company and level of input
- Identify any entities that paid for this assistance
- Confirm that the listed authors have authorized the submission of their manuscript via third party and approved any statements or declarations, e.g. conflicting interests, funding, etc.
Where appropriate, Sage reserves the right to deny consideration to manuscripts submitted by a third party rather than by the authors themselves.
2.3.2 Writing assistance
Individuals who provided writing assistance, e.g. from a specialist communications company, do not qualify as authors and so should be included in the Acknowledgements section. Authors must disclose any writing assistance – including the individual’s name, company and level of input – and identify the entity that paid for this assistance. It is not necessary to disclose use of language polishing services.
Journal of Engineering for the Maritime Environment requires all authors to acknowledge their funding in a consistent fashion under a separate heading. Please visit the Funding Acknowledgements page on the Sage Journal Author Gateway to confirm the format of the acknowledgment text in the event of funding, or state that: This research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.
2.5 Declaration of conflicting interests
It is the policy of Journal of Engineering for the Maritime Environment to require a declaration of conflicting interests from all authors enabling a statement to be carried within the paginated pages of all published articles.
Please ensure that a ‘Declaration of Conflicting Interests’ statement is included at the end of your manuscript, after any acknowledgements and prior to the references. If no conflict exists, please state that ‘The Author(s) declare(s) that there is no conflict of interest’. For guidance on conflict of interest statements, please see the ICMJE recommendations here.
The journal is committed to facilitating openness, transparency and reproducibility of research, and has the following research data sharing policy. For more information, including FAQs please visit the Sage Research Data policy pages.
Subject to appropriate ethical and legal considerations, authors are encouraged to:
- share your research data in a relevant public data repository
- include a data availability statement linking to your data. If it is not possible to share your data, we encourage you to consider using the statement to explain why it cannot be shared.
- cite this data in your research
Sage is committed to upholding the integrity of the academic record. We encourage authors to refer to the Committee on Publication Ethics’ International Standards for Authors and view the Publication Ethics page on the Sage Author Gateway
3.1.1 Plagiarism
Journal of Engineering for the Maritime Environment and Sage take issues of copyright infringement, plagiarism or other breaches of best practice in publication very seriously. We seek to protect the rights of our authors and we always investigate claims of plagiarism or misuse of published articles. Equally, we seek to protect the reputation of the journal against malpractice. Submitted articles may be checked with duplication-checking software. Where an article, for example, is found to have plagiarised other work or included third-party copyright material without permission or with insufficient acknowledgement, or where the authorship of the article is contested, we reserve the right to take action including, but not limited to: publishing an erratum or corrigendum (correction); retracting the article; taking up the matter with the head of department or dean of the author's institution and/or relevant academic bodies or societies; or taking appropriate legal action.
3.1.2 Prior publication
If material has been previously published it is not generally acceptable for publication in a Sage journal. However, there are certain circumstances where previously published material can be considered for publication. Please refer to the guidance on the Sage Author Gateway or if in doubt, contact the Editor at the address given below.
3.2 Contributor's publishing agreement
Before publication, Sage requires the author as the rights holder to sign a Journal Contributor’s Publishing Agreement. Sage’s Journal Contributor’s Publishing Agreement is an exclusive licence agreement which means that the author retains copyright in the work but grants Sage the sole and exclusive right and licence to publish for the full legal term of copyright. Exceptions may exist where an assignment of copyright is required or preferred by a proprietor other than Sage. In this case copyright in the work will be assigned from the author to the society. For more information please visit the Sage Author Gateway.
3.3 Open access and author archiving
Journal of Engineering for the Maritime Environment offers optional open access publishing via the Sage Choice programme and Open Access agreements, where authors can publish open access either discounted or free of charge depending on the agreement with Sage. Find out if your institution is participating by visiting Open Access Agreements at Sage. For more information on Open Access publishing options at Sage please visit Sage Open Access. For information on funding body compliance, and depositing your article in repositories, please visit Sage’s Author Archiving and Re-Use Guidelines and Publishing Policies.
4. Preparing your manuscript for submission
The preferred format for your manuscript is Word. LaTeX files are also accepted. Word and (La)Tex templates are available on the Manuscript Submission Guidelines page of our Author Gateway.
4.2 Artwork, figures and other graphics
For guidance on the preparation of illustrations, pictures and graphs in electronic format, please visit Sage’s Manuscript Submission Guidelines.
Figures supplied in colour will appear in colour online regardless of whether or not these illustrations are reproduced in colour in the printed version. For specifically requested colour reproduction in print, you will receive information regarding the costs from Sage after receipt of your accepted article.
This journal is able to host additional materials online (e.g. datasets, podcasts, videos, images etc) alongside the full-text of the article. For more information please refer to our guidelines on submitting supplementary files.
Journal of Engineering for the Maritime Environment adheres to the Sage Vancouver reference style. View the Sage Vancouver guidelines to ensure your manuscript conforms to this reference style.
If you use EndNote to manage references, you can download the Sage Vancouver EndNote output file.
4.5 English language editing services
Authors seeking assistance with English language editing, translation, or figure and manuscript formatting to fit the journal’s specifications should consider using Sage Language Services. Visit Sage Language Services on our Journal Author Gateway for further information.
Journal of Engineering for the Maritime Environment is hosted on Sage Track, a web based online submission and peer review system powered by ScholarOne™ Manuscripts. Visit http://mc.manuscriptcentral.com/jeme to login and submit your article online.
IMPORTANT: Please check whether you already have an account in the system before trying to create a new one. If you have reviewed or authored for the journal in the past year it is likely that you will have had an account created. For further guidance on submitting your manuscript online please visit ScholarOne Online Help.
As part of our commitment to ensuring an ethical, transparent and fair peer review process Sage is a supporting member of ORCID, the Open Researcher and Contributor ID. ORCID provides a unique and persistent digital identifier that distinguishes researchers from every other researcher, even those who share the same name, and, through integration in key research workflows such as manuscript and grant submission, supports automated linkages between researchers and their professional activities, ensuring that their work is recognized.
The collection of ORCID iDs from corresponding authors is now part of the submission process of this journal. If you already have an ORCID iD you will be asked to associate that to your submission during the online submission process. We also strongly encourage all co-authors to link their ORCID ID to their accounts in our online peer review platforms. It takes seconds to do: click the link when prompted, sign into your ORCID account and our systems are automatically updated. Your ORCID iD will become part of your accepted publication’s metadata, making your work attributable to you and only you. Your ORCID iD is published with your article so that fellow researchers reading your work can link to your ORCID profile and from there link to your other publications.
If you do not already have an ORCID iD please follow this link to create one or visit our ORCID homepage to learn more.
5.2 Information required for completing your submission
You will be asked to provide contact details and academic affiliations for all co-authors via the submission system and identify who is to be the corresponding author. These details must match what appears on your manuscript. At this stage please ensure you have included all the required statements and declarations and uploaded any additional supplementary files (including reporting guidelines where relevant).
Please also ensure that you have obtained any necessary permission from copyright holders for reproducing any illustrations, tables, figures or lengthy quotations previously published elsewhere. For further information including guidance on fair dealing for criticism and review, please see the Copyright and Permissions page on the Sage Author Gateway.
6. On acceptance and publication
Your Sage Production Editor will keep you informed as to your article’s progress throughout the production process. Proofs will be sent by PDF to the corresponding author and should be returned promptly. Authors are reminded to check their proofs carefully to confirm that all author information, including names, affiliations, sequence and contact details are correct, and that Funding and Conflict of Interest statements, if any, are accurate.
Online First allows final articles (completed and approved articles awaiting assignment to a future issue) to be published online prior to their inclusion in a journal issue, which significantly reduces the lead time between submission and publication. Visit the Sage Journals help page for more details, including how to cite Online First articles.
6.3 Access to your published article
Sage provides authors with online access to their final article.
Publication is not the end of the process! You can help disseminate your paper and ensure it is as widely read and cited as possible. The Sage Author Gateway has numerous resources to help you promote your work. Visit the Promote Your Article page on the Gateway for tips and advice.
Any correspondence, queries or additional requests for information on the manuscript submission process should be sent to the Journal of Engineering for the Maritime Environment editorial office as follows:
Publishing Editor
Sage Publications Ltd
1 Oliver's Yard, 55 City Road
London, EC1Y 1SP
UK
Email: jeme@sagepub.co.uk