Ironmaking & Steelmaking

Manuscript Submission Guidelines: Ironmaking & Steelmaking

This Journal is a member of the Committee on Publication Ethics.

This Journal recommends that authors follow the Recommendations for the Conduct, Reporting, Editing, and Publication of Scholarly Work in Medical Journals formulated by the International Committee of Medical Journal Editors (ICMJE).

Please read the guidelines below then visit the Journal’s submission site  https://mc.manuscriptcentral.com/ims to upload your manuscript. Please note that manuscripts not conforming to these guidelines may be returned. Remember you can log in to the submission site at any time to check on the progress of your paper through the peer review process.

Sage disseminates high-quality research and engaged scholarship globally, and we are committed to diversity and inclusion in publishing. We encourage submissions from a diverse range of authors from across all countries and backgrounds.

Only manuscripts of sufficient quality that meet the aims and scope of Ironmaking & Steelmaking will be reviewed.

There are no fees payable to submit or publish in this Journal.

As part of the submission process you will be required to warrant that you are submitting your original work, that you have the rights in the work, and that you have obtained and can supply all necessary permissions for the reproduction of any copyright works not owned by you, that you are submitting the work for first publication in the Journal and that it is not being considered for publication elsewhere and has not already been published elsewhere. Please see our guidelines on prior publication and note that Ironmaking & Steelmaking will consider submissions of papers that have been posted on preprint servers; please alert the Editorial Office when submitting (contact details are at the end of these guidelines) and include the DOI for the preprint in the designated field in the manuscript submission system. Authors should not post an updated version of their paper to a preprint server while it is being peer reviewed for possible publication in the Journal. If your paper is accepted, you will need to contact the preprint server to ensure the final published article link is attached to your preprint. Learn more about our preprint policy here.

If you have any questions about publishing with Sage, please visit the Sage Journal Solutions Portal.

1. What do we publish?
   1.1 Aims & Scope
   1.2 Article types
   1.3 Writing your paper
2. Editorial policies
   2.1 Peer review policy
   2.2 Authorship
   2.3 Acknowledgements
   2.4 Funding
   2.5 Declaration of conflicting interests
   2.6 Research ethics and patient consent
   2.7 Research data
3. Publishing policies
   3.1 Publication ethics
   3.2 Contributor’s publishing agreement
   3.3 Open access and author archiving
4. Preparing your manuscript
   4.1 Formatting
   4.2 Artwork, figures and other graphics
   4.3 Identifiable information
   4.4 Supplemental material
   4.5 Reference style
   4.6 English language editing services
5. Submitting your manuscript
   5.1 ORCID
   5.2 Information required for completing your submission
   5.3 Permissions
6. On acceptance and publication
   6.1 SAGE Production
   6.2 Online First publication
   6.3 Access to your published article
   6.4 Promoting your article
7. Further information
   7.1 Appealing the publication decision

1. What do we publish?

1.1 Aims & Scope

Before submitting your manuscript to Ironmaking & Steelmaking, please ensure you have read the Aims & Scope below:

Ironmaking & Steelmaking: Processes, Products and Applications monitors international technological advances in the industry with a strong element of engineering and product related material. First class refereed papers from the international iron and steel community cover all stages of the process, from ironmaking and its attendant technologies, through casting and steelmaking, to rolling, forming and delivery of the product, including monitoring, quality assurance and environmental issues. The journal also carries research profiles, features on technological and industry developments and expert reviews on major conferences.

Steel World

Twice a year Ironmaking & Steelmaking publishes special Steel World issues. These issues include an extended news and features section focusing on strategic and technical developments in the steel industry. They are widely circulated to members of the Institute Steel Division and senior steel industry personnel worldwide, in addition to subscribers to Ironmaking & Steelmaking.

The combination of Steel World (previously a separate publication of the Institute of Materials) and Ironmaking & Steelmaking offers an exceptional opportunity for information dissemination and technical awareness in the industry.

1.2 Article types

Ironmaking & Steelmaking publishes the following types of articles:

Research articles report research and practice, typically 3500 words in length plus figures and tables.

Short communications are for preliminary announcements of the results of current work, or short accounts of new techniques: typically, 1000–1500 words in length with, at most, four figures and/or tables.

Reviews should deal with their subject in a broad perspective, examining the current position critically and comprehensively; these are typically 4000–5000 words in length plus figures and tables, and well referenced. The word count is a guideline only and longer reviews will be considered as appropriate.

Authors wishing to contribute a review should contact the editor to discuss their proposal before submitting: norriemcpherson1@hotmail.com; pasquale.cavaliere@unisalento.it

The journal publishes special issues focusing on topics of current interest. Proposals for special issues are welcome and should be addressed to the editors: norriemcpherson1@hotmail.com; pasquale.cavaliere@unisalento.it

Please note that this journal only publishes manuscripts in English.

Please visit our Sage Author Gateway for guidance on producing visual and/or video abstracts.

1.3 Writing your paper

Visit the Sage Author Gateway for general advice on how to get published, plus links to further resources.

Sage Author Services also offers authors a variety of ways to improve and enhance your article including English language editing, plagiarism detection, and video abstract and infographic preparation.

1.3.1 Make your article discoverable

For information and guidance on how to make your article more discoverable, visit our Gateway page on How to Help Readers Find Your Article Online.

Back to top

2. Editorial policies

        2.1 Peer review policy

Sage does not permit the use of author-suggested (recommended) reviewers at any stage of the submission process, be that through the web-based submission system or other communication.

Reviewers should be experts in their fields and should be able to provide an objective assessment of the manuscript. Our policy is that reviewers should not be assigned to a paper if:

• The reviewer is based at the same institution as any of the co-authors.
• The reviewer is based at the funding body of the paper.
• The author has recommended the reviewer.
• The reviewer has provided a personal (e.g. Gmail/Yahoo/Hotmail) email account and an institutional email account cannot be found after performing a basic Google search (name, department and institution).

The journal’s policy is to have manuscripts reviewed by two expert reviewers. Ironmaking & Steelmaking utilizes a single-anonymized peer review process in which the reviewer’s name and information is withheld from the author. Reviewers may at their own discretion opt to reveal their names to the author in their review but our standard policy practice is for their identities to remain concealed. All manuscripts are reviewed as rapidly as possible, while maintaining rigor. Reviewers make comments to the author and recommendations to the Editor who then makes the final decision.

The Editor or members of the Editorial Board may occasionally submit their own manuscripts for possible publication in the Journal. In these cases, the peer review process will be managed by alternative members of the Board and the submitting Editor/Board member will have no involvement in the decision-making process.

Ironmaking & Steelmaking is committed to delivering high quality, fast peer-review for your paper, and as such has partnered with Web of Science (previously Publons). Web of Science is a third-party service that seeks to track, verify and give credit for peer review. Reviewers for Ironmaking & Steelmaking can opt in to Web of Science in order to claim their reviews or have them automatically verified and added to their reviewer profile. Reviewers claiming credit for their review will be associated with the relevant journal, but the article name, reviewer’s decision and the content of their review is not published on the site. For more information visit the Web of Science website.

The Editor or members of the Editorial Board may occasionally submit their own manuscripts for possible publication in the Journal. In these cases, the peer review process will be managed by alternative members of the Board and the submitting Editor/Board member will have no involvement in the decision-making process.

2.2 Authorship

Papers should only be submitted for consideration once consent is given by all contributing authors. Those submitting papers should carefully check that all those whose work contributed to the paper are acknowledged as contributing authors.

The list of authors should include all those who can legitimately claim authorship. This is all those who:

1. Made a substantial contribution to the concept or design of the work; or acquisition, analysis or interpretation of data,
2. Drafted the article or revised it critically for important intellectual content,
3. Approved the version to be published,
4. Each author should have participated sufficiently in the work to take public responsibility for appropriate portions of the content.
    

Authors should meet the conditions of all of the points above. When a large, multicentre group has conducted the work, the group should identify the individuals who accept direct responsibility for the manuscript. These individuals should fully meet the criteria for authorship.

Acquisition of funding, collection of data, or general supervision of the research group alone does not constitute authorship, although all contributors who do not meet the criteria for authorship should be listed in the Acknowledgments section. Please refer to the International Committee of Medical Journal Editors (ICMJE) authorship guidelines for more information on authorship.

Please note that AI chatbots, for example ChatGPT, should not be listed as authors. For more information see the policy on Use of ChatGPT and generative AI tools.

2.3 Acknowledgements

All contributors who do not meet the criteria for authorship should be listed in an Acknowledgements section. Examples of those who might be acknowledged include a person who provided purely technical help, or a department chair who provided only general support.

Any acknowledgements should appear first at the end of your article prior to your Declaration of Conflicting Interests (if applicable), any notes and your References.

Per ICMJE recommendations, it is best practice to obtain consent from non-author contributors who you are acknowledging in your paper.

2.3.1 Third party submissions
Where an individual who is not listed as an author submits a manuscript on behalf of the author(s), a statement must be included in the Acknowledgements section of the manuscript and in the accompanying cover letter. The statements must:

• Disclose this type of editorial assistance – including the individual’s name, company and level of input
• Identify any entities that paid for this assistance
• Confirm that the listed authors have authorized the submission of their manuscript via third party and approved any statements or declarations, e.g. conflicting interests, funding, etc.

Where appropriate, Sage reserves the right to deny consideration to manuscripts submitted by a third party rather than by the authors themselves.

2.3.2 Writing assistance

Individuals who provided writing assistance, e.g. from a specialist communications company, do not qualify as authors and so should be included in the Acknowledgements section. Authors must disclose any writing assistance – including the individual’s name, company and level of input – and identify the entity that paid for this assistance. It is not necessary to disclose use of language polishing services.

2.4 Funding

Ironmaking & Steelmaking requires all authors to acknowledge their funding in a consistent fashion under a separate heading.  Please visit the Funding Acknowledgements page on the Sage Journal Author Gateway to confirm the format of the acknowledgment text in the event of funding, or state that: This research received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.

2.5 Declaration of conflicting interests

It is the policy of Ironmaking & Steelmaking to require a declaration of conflicting interests from all authors enabling a statement to be carried within the paginated pages of all published articles.

Please ensure that a ‘Declaration of Conflicting Interests’ statement is included at the end of your manuscript, after any acknowledgements and prior to the references. If no conflict exists, please state that ‘The Author(s) declare(s) that there is no conflict of interest’. For guidance on conflict of interest statements, please see the ICMJE recommendations here.

2.6 Research ethics and patient consent

Ironmaking & Steelmaking does not report on human and/or animal studies.

2.7 Research data

The Journal is committed to facilitating openness, transparency and reproducibility of research, and has the following research data sharing policy. For more information, including FAQs please visit the Sage Research Data policy pages.

Subject to appropriate ethical and legal considerations, authors are encouraged to:

• Share your research data in a relevant public data repository
• Include a data availability statement linking to your data. If it is not possible to share your data, use the statement to confirm why it cannot be shared.
• Cite this data in your research

Back to top

3. Publishing policies

3.1 Publication ethics

Sage is committed to upholding the integrity of the academic record. We encourage authors to refer to the Committee on Publication Ethics’ International Standards for Authors and view the Publication Ethics page on the Sage Author Gateway.

3.1.1 Plagiarism

Ironmaking & Steelmaking and Sage take issues of copyright infringement, plagiarism or other breaches of best practice in publication very seriously. We seek to protect the rights of our authors and we always investigate claims of plagiarism or misuse of published articles. Equally, we seek to protect the reputation of the Journal against malpractice. Submitted articles may be checked with duplication-checking software. Where an article, for example, is found to have plagiarized other work or included third-party copyright material without permission or with insufficient acknowledgement, or where the authorship of the article is contested, we reserve the right to take action including, but not limited to: publishing an erratum or corrigendum (correction); retracting the article; taking up the matter with the head of department or dean of the author's institution and/or relevant academic bodies or societies; or taking appropriate legal action.

3.1.2 Prior publication

If material has been previously published it is not generally acceptable for publication in a Sage journal. However, there are certain circumstances where previously published material can be considered for publication. Please refer to the guidance on the Sage Author Gateway or if in doubt, contact the Editor at the address given below.

3.2 Contributor’s publishing agreement

Before publication, Sage requires the author as the rights holder to sign a Journal Contributor’s Publishing Agreement. Sage’s Journal Contributor’s Publishing Agreement is an exclusive licence agreement which means that the author retains copyright in the work but grants Sage the sole and exclusive right and licence to publish for the full legal term of copyright. Exceptions may exist where an assignment of copyright is required or preferred by a proprietor other than Sage. In this case copyright in the work will be assigned from the author to the society. For more information, please visit the Sage Author Gateway.

3.3 Open access and author archiving

Ironmaking & Steelmaking offers optional open access publishing via the Sage Choice programme. For more information on Open Access publishing options at Sage please visit Sage Open Access. For information on funding body compliance, and depositing your article in repositories, please visit Sage’s Author Archiving and Re-Use Guidelines and Publishing Policies.

Back to top

4. Preparing your manuscript

4.1 Formatting

The preferred format for your manuscript is Word.

4.2 Artwork, figures and other graphics

For guidance on the preparation of illustrations, pictures and graphs in electronic format, please visit Sage’s Manuscript Submission Guidelines.

Figures supplied in colour will appear in colour online regardless of whether or not these illustrations are reproduced in colour in the printed version. For specifically requested colour reproduction in print, you will receive information regarding the costs from Sage after receipt of your accepted article.

4.3 Identifiable information

Where a journal uses double-anonymised peer review, authors are required to submit:

1. A version of the manuscript which has had any information that compromises the anonymity of the author(s) removed or anonymized. This version will be sent to the peer reviewers.
2. A separate title page which includes any removed or anonymised material. This will not be sent to the peer reviewers.

Visit the Sage Author Gateway for detailed guidance on making an anonymous submission.

4.4 Supplemental material

This Journal is able to host additional materials online (e.g. datasets, podcasts, videos, images etc.) alongside the full-text of the article. For more information please refer to our guidelines on submitting supplemental files.

4.5 Reference style

Ironmaking & Steelmaking adheres to the Sage Vancouver reference style. View the Sage Vancouver guidelines to ensure your manuscript conforms to this reference style.

If you use EndNote to manage references, you can download the Sage Vancouver EndNote output file.

4.6 English language editing services

Authors seeking assistance with English language editing, translation, or figure and manuscript formatting to fit the Journal’s specifications should consider using Sage Language Services. Visit Sage Language Services on our Journal Author Gateway for further information.

Back to top

5. Submitting your manuscript

Ironmaking & Steelmaking is hosted on Editorial Manager. Visit https://mc.manuscriptcentral.com/ims to login and submit your article online.

IMPORTANT: Please check whether you already have an account in the system before trying to create a new one. If you have reviewed or authored for the Journal in the past year it is likely that you will have had an account created.  For further guidance on submitting your manuscript online please visit ScholarOne Online Help.

5.1 ORCID

As part of our commitment to ensuring an ethical, transparent and fair peer review process Sage is a supporting member of ORCID, the Open Researcher and Contributor ID. ORCID provides a unique and persistent digital identifier that distinguishes researchers from every other researcher, even those who share the same name, and, through integration in key research workflows such as manuscript and grant submission, supports automated linkages between researchers and their professional activities, ensuring that their work is recognized.

We encourage all authors and co-authors to link their ORCIDs to their accounts in our online peer review platforms. It takes seconds to do: click the link when prompted, sign into your ORCID account and our systems are automatically updated. We collect ORCID IDs during the manuscript submission process and your ORCID ID then becomes part of your accepted publication’s metadata, making your work attributable to you and only you. Your ORCID ID is published with your article so that fellow researchers reading your work can link to your ORCID profile and from there link to your other publications.

If you do not already have an ORCID ID please follow this link to create one or visit our ORCID homepage to learn more.

5.2 Information required for completing your submission

You will be asked to provide contact details and academic affiliations for all co-authors via the submission system and identify who is to be the corresponding author. These details must match what appears on your manuscript. The affiliation listed in the manuscript should be the institution where the research was conducted. If an author has moved to a new institution since completing the research, the new affiliation can be included in a manuscript note at the end of the paper. At this stage please ensure you have included all the required statements and declarations and uploaded any additional supplementary files (including reporting guidelines where relevant).

5.3 Permissions

Please also ensure that you have obtained any necessary permission from copyright holders for reproducing any illustrations, tables, figures or lengthy quotations previously published elsewhere. For further information including guidance on fair dealing for criticism and review, please see the Copyright and Permissions page on the Sage Author Gateway.

Back to top

6. On acceptance and publication

6.1 SAGE Production

Your Sage Production Editor will keep you informed as to your article’s progress throughout the production process. Proofs will be made available to the corresponding author via our editing portal Sage Edit or by email, and corrections should be made directly or notified to us promptly. Authors are reminded to check their proofs carefully to confirm that all author information, including names, affiliations, sequence and contact details are correct, and that Funding and Conflict of Interest statements, if any, are accurate.

6.2 Online First publication

Online First allows final articles (completed and approved articles awaiting assignment to a future issue) to be published online prior to their inclusion in a journal issue, which significantly reduces the lead time between submission and publication. Visit the Sage Journals help page for more details, including how to cite Online First articles.

6.3 Access to your published article

Sage provides authors with online access to their final article.

6.4 Promoting your article

Publication is not the end of the process! You can help disseminate your paper and ensure it is as widely read and cited as possible. The Sage Author Gateway has numerous resources to help you promote your work. Visit the Promote Your Article page on the Gateway for tips and advice.

Back to top

7. Further information

Any correspondence, queries or additional requests for information on the manuscript submission process should be sent to the Ironmaking & Steelmaking editorial office as follows:

Dr. N. McPherson

norriemcpherson1@hotmail.com

Dr P D Cavaliere
pasquale.cavaliere@unisalento.it  

7.1 Appealing the publication decision

Editors have very broad discretion in determining whether an article is an appropriate fit for their journal. Many manuscripts are declined with a very general statement of the rejection decision. These decisions are not eligible for formal appeal unless the author believes the decision to reject the manuscript was based on an error in the review of the article, in which case the author may appeal the decision by providing the Editor with a detailed written description of the error they believe occurred.

If an author believes the decision regarding their manuscript was affected by a publication ethics breach, the author may contact the publisher with a detailed written description of their concern, and information supporting the concern, at publication_ethics@sagepub.com.

Back to top